How to create a beautiful frame in word. How to make a frame around text and around a page in Word. How to make a border in Word - Page border color

16.10.2023

The desire for transformation is inherent in man by nature and manifests itself in all areas of life. This feature is implemented in computer programs using built-in MS Office tools. In Word, you can add a border to all or individual pages, sections or part of the text. In the settings, you can change the line type, thickness, color, and even insert a graphic design.

Often, to make the presented material clearer, it is necessary to use various decorative elements in the text. The simplest of them is a decorative frame around the text. Unfortunately, some users do not delve into the functionality of MS Word and insert text into a table consisting of one cell. Such an element is difficult to change and the text inside is practically impossible to adjust. Difficulties may arise with editing the page itself if there are still tables in the text. Therefore, to focus attention, it is better to make a frame.

Frames in a document: differences between different versions of Word

Built-in Word tools allow you to create different text borders. With each new release of the program, the toolbar changed, but the appearance of the frames did not change.

For Word 2003

For Word 2007

For Word 2010

How to make a border around an entire page in Word

Let's look at how to open the border settings panel in different versions of Word. IN Word 2010 And 2007 paragraph " Page Borders" is located on the " tab Page layout».

IN Word 2003 select " Format» - « Borders and Shading" If this item is not present, then you should display the list in full by clicking on the button in the form of two arrows.

Go to the "" tab.

Type - frame.
Specify color and thickness.
A graphic frame in the form, for example, of trees, is configured through the parameter “ Drawing».
“Apply to – this section (1st page only).”

To see the borders on the screen, you need to open the document in page view mode.

Borders can be set either on an empty sheet or on an already filled one.

How to insert a frame around text in Word

This process is not much different from that described earlier. To make a frame around the text, you need to select the text, and then in the menu " Page Borders» specify parameters on the tab « Border».

Select the type, thickness, and color of the frame. In point " Apply to"select "".

You can set a border only on a specific part of the text, such as the one at the top, center, or bottom. To do this, select the type " Other", and in the section " Sample» indicate part of the text.

How to set frames on all pages in a document at once

To make a frame in Word on all pages you need to use the parameter “ Apply to» select the item « Entire document».

How to make a frame of a certain size

Sometimes there is a need to make a frame in Word according to specified parameters and indicate it on separate sheets. Let's look at how this is implemented in the program.

To place a frame only on the title page, you need to specify its parameters, as described earlier, and then select “ Apply to» - « This section (1st page only)».

For a diploma, report or coursework

In theses and term papers, frames are usually indicated on all other pages except the title page. This is configured in the “ Apply to» - « This section (except 1st page)».

Frame with stamp for technical documents

On the "" tab, click "".

A window will open with the default border settings. Knowing that 1 pt = 1/72 = 0.0353 cm, you can set any border width, for example, 1 cm.

In order to make a frame in Word 2003, you need highlight page by clicking on it.

A window with the same name appears. In it we go to the second tab, “ Page", where we select the necessary options for the frame.

Here you can set color And thickness lines. The buttons on the right indicate which sides of the sheet the frame will be placed on. In the list " Type" can choose form lines - double, solid, or dotted. " Drawing» allows you to set the frame with one of the repeating template patterns.

To move the frame relative to the borders of the sheet, you need to click on the button " Options" V right bottom corner.

Frames in Word 2007, 10, 13

Since the 2007 version, the program interface has changed significantly. Now to create a frame you need to find the section “ Page layout" and click on " Page Borders».

Starting from version 2013, this button is moved to the “ Design».

The window that appears is no different from its previous versions. It shows everything available options: type, color and width of the line, the possibility of design with a repeating pattern, and the sides on which the frame will be displayed.

Beautiful frame from a picture

Framing a document can be done not only directly using the means intended for this, but also with images, which allows you to significantly diversify the design of the document.

To do this, you will need to download the image you like in a suitable format. The larger the image, the clearer and more beautiful it will be when printed.

Next you need insert downloaded image onto the sheet. This can be done in the menu " Insert", selecting the item " Drawing" or simply by dragging file into the program window.

After this you will need highlight click on the picture, and right-click on it and select “ Size and position» from the context menu.

In the pop-up window, go to the “ Text wrapping" and select the item " behind the text».

Now the image will not overlap the typed text and will remain on in the background. In addition, it is not tied to the borders of the sheet, and can freely move to the very edges.

If the picture does not fit in size, you can stretch for the “corners” that appear. Points in the corners change size while maintaining proportions, and points on the sides are stretched vertically or horizontally.

Most of us work with such an indispensable program as Microsoft Word. It is irreplaceable due to the fact that it provides us with limitless flights of imagination in document design: drawings, tables, fonts, diagrams, SmartArt - everything your heart desires. It would seem that we have long learned to work in this editor, but sometimes we are faced with the fact that due to ignorance we are unable to implement what we ultimately want to achieve. For example, many still do not know how to make a frame around text or around a page in Word. There is nothing wrong with this, especially since it is so easy to fix! Read the article and remember.

Perhaps you will find it useful:

, starting from the second (without title page)
, if it is not deleted

How to make a frame around text in Word?

Some manage to frame the text using a table of one cell. The result seems to be the same, but the principle itself remains incorrect. The main disadvantage of creating a frame around text from a table is that the user is deprived of the opportunity to choose the pattern and color of the frame, and this is the most important thing. This is exactly what gives all the beauty to the document. Therefore, in order to make a frame around the text in Word according to your mind, just a few necessary clicks are enough:

Next “Page Borders”
In the window that appears, select the “Border” tab. Customize to taste.
Apply to paragraph
Save

There is also another option that allows you to open a window in which you can also make a frame around the text in Word. It's even simpler. In general, the principle of operation does not change, just for general education it can be shown: in the “Home” tab, click on the symbolic “Borders and Fill” tab. And then everything is the same as described above.

How to make a frame around the edges of a page in Word?

To make a frame around the edges of the page in Word, one minute is enough. Just like when creating a frame around the text, we call up the “Page Borders” settings window:

Select the text you want to frame
Click on the “Page Layout” tab
Next “Page Borders”
In the window that appears, select the central “Page” tab.
Customize at your own discretion
We apply it depending on the need: to the entire document (then all pages of the document will be in a frame) or to one page. Experiment.
Save by clicking “OK”

How to make a beautiful frame in Word?

With the same success, in addition to classic frames, you can use more beautiful, interesting frame options in Word. They are called graphic due to the small drawings that will frame the page. Of course, such frames are not for official documents, but for thematic cases they are perfect. To make a beautiful frame in Word, we also go to the “Page Borders” parameters, and in the window that appears, remain on the “Page” tab. At the bottom there will be a “Drawing”, where in the corresponding field you select the frame you like.

People have always wanted to decorate and transform their work. The same applies to the Word program. Some users need (or just want) to make their document more presentable by putting a frame around it. And Word can do this.

Word 2003 is already an older version of this program, which differs in functionality from its successors. But still, it is still used among a number of users. Therefore, let’s first look at how you can make a frame in Word 2003.

Frame in Word 2003

Open the program and the file we need.
We look at the toolbar and go to the “Format” tab. Click on it and open the “Borders and Fill” item.
Then we will need to go to the page tab, where we select the frame we need, the line type, and its width. Select, click “OK” and you’re done.

You can mark all the changes made by going along the same path, but only in the “Borders and Fill” tab we just need to check the “No” checkbox. That's all.

Frame in Word 2007 and higher

Open Word and open the file we need. Look at the toolbar at the top and go to the “Page Layout” tab.
Go further to “Page Background” and go to the “Page Borders” tab.
The “Borders and Fills” window will open, there go to the “Pages” tab and here we already select the type of frame we need, its width, color. There you can also specify in which part of the document to use the frame.
Click "OK" and you're done.

Microsoft Word provides quite a wide range of options for formatting and designing text in documents. One of the options for the latter may be a frame, and it is its creation that we will talk about today.

There is only one method documented by Microsoft developers for adding a frame to a Word document, but if you give free rein to your imagination, you can find a couple of alternative solutions that provide slightly broader design and customization options. Let's look at all of them in more detail.

Method 1: Page Borders

Let's start with the simplest and most obvious method of creating a frame in Word, by turning to the section for setting page borders.

Method 2: Table

In Microsoft Word, you can create tables, fill them with data, and design them using different styles and layouts. By stretching just one cell along the edges of the page, we get a simple frame that can be given the desired appearance.

Go to the tab "Insert", expand the button drop-down menu "Table" and use the cursor to indicate the size of one cell. Click the left mouse button (LMB) to add it to the document page.

Using the mouse, drag the cell along the edges of the page. Be careful not to go beyond the fields.

Note: When borders are “crossed”, they will be highlighted in green and displayed as a thin strip.

There is a base for the frame, but you probably won’t want to settle for a simple black rectangle.

You can give the object the desired look in the tab "Table designer", which appears on the Word toolbar when you select an added element.

In this way you can create both a relatively simple and a more original frame.

Note: The text inside such a table frame is written and formatted in exactly the same way as regular text in a document, but in addition it can be aligned relative to the borders of the table and/or its center. The necessary tools are in the additional tab "Layout" located in the group "Working with tables".

Method 3: Figure

Similar to a one-cell table, you can use the inserting shapes section to create a frame in Word. In addition, the possibilities for their design provided by the program are much wider.

Open the tab "Insert", click on the item "Shapes" and select any desired element that more or less resembles a rectangle. Select it by pressing LMB.

Hold LMB in one of the upper corners of the page and drag it diagonally to the opposite one, thus creating a frame that will “rest” against the margins, but not go beyond them.

Note: You can select not only “empty” shapes (outlines), but also those that have a fill applied, as in our example. In the future, it can be easily removed, leaving only the frame itself.

Having selected the added object, go to the tab "Shape Format".

This way you can create a truly unique frame, giving the document a desired and recognizable design.

To start writing text inside this shape, right-click on it (RMB) and select the item in the context menu "Add text". A similar result can be achieved by double-clicking LMB.

By default it will be written from the center. To change this, in the tab "Shape Format", in the tools group "Text" expand the item menu "Alignment" and select the appropriate option. The optimal solution would be "On the top edge".

In the tab "Home" You can set your preferred horizontal alignment type.